Flowline DeltaSpan LD32 Submersible Pressure Level Transmitter, 23 ft. Range, Intrinsically Safe

Description

Flowline’s general purpose submersible pressure level transmitter provides continuous level measurement up to 46 ft. (14 m) water column with a 4-20mA signal output. This liquid level sensor is for dirty, coating or slurry type liquids, examples include pump lift stations and waste sumps.

Features

• Rugged clog resistant diaphragm with heavy duty protection shield
• Strong cable design with maintenance free breather tube and vent filter
• Corrosion resistant 316 Stainless Steel body and shield with polyurethane cable
• Temperature compensation, lightning and surge protection for reliable measurement
• Simple installation via suspended cable
• Fixed span does not require any calibration
• Connects directly to PLC, SCADA or display
• Ideal for use with submersible pumps

Specifications

• Single point switches
• Range: 0 to 10 PSI (0.69 bar) @ 23′ ft. (0 to 7 m) wc
• ±0.25% full scale
• Sensor thread: 1/2 in. NPT
• Configuration: None, fixed span
• Supply voltage: 13 to 0V DC
• Loop resist: 850 Ohms @ 30V DC
• Signal output: 4-20 mA, two-wire
• 40 ft. (12.2 m) polyurethane cable with polyethylene jacket
• 2-conductor, shielded cable with vent tube
• Proof Pressure: 2x full scale
• Process temperature: 0° to 200° F (-18° to 93°C)
• Temp Comp.: 0° to 180° F (-18° to 82°C) li>
• Sensor material: 316 Stainless steel and nitrile rubber
• General Purpose classification
• Sensor Dimensions: 7.98 in. ( 202.8 mm) L x 1.5 in. (38.1 mm) dia. X 2.19in. (55.8 mm) W with 40 ft. L cable
• Sensor Weight: 4.3 lbs. (2.0 kg)
• Compliance: CE

Downloads

Datasheet (PDF Download)

Manual (PDF Download)

Quick Start (PDF Download)